| 
For ease of installation and to promote the widest
possible range of applications, all T-311 connectors are standard
and modular. The T-311 offers 5 external interfaces for connections
to:
 |
Audio source via 5-pin DIN
connector |
 |
Audio headset via 4-wire modular jack |
 |
Telephone set via RJ-11 or RJ-14 modular
jack |
 |
Telephone line via RJ-11 or RJ-14 modular
jack |
 |
Computer via DB-9 serial interface |
The T-311 includes five front-panel status LEDs
to identify current activity.
Electronic Voice
By controlling an audio source such as a recorded
tape player or speech synthesizer, the computer can use the T-311
to send messages to the called party, or record messages received
over the phone line.
Audio Headset
When used with a headset, the T-311 becomes a powerful
and efficient "computerized telephone" for telemarketing
and similar applications, relieving the user of most of the mechanics
of setting up, dialing, and disconnecting calls.
The headset should meet the following requirements:
 |
UL and CSA approval |
 |
Electret-type microphone (typically battery
or AC powered) |
 |
external amplifier with volume control
|
 |
modular four-wire connector (plugs into
front of T-311) |
Note: Headsets with telephone-like
features duplicate some of the functions of the T-311 and may require
additional programming.
Telephone Interface
A telephone connected to the T-311 can be used two
ways:
 |
As an auxiliary telephone sharing
the line with the T-311. In this mode, outgoing calls are dialed
from the telephone set directly over the telephone and do not
go through the T-311 circuitry. |
 |
Operating through the T-311. In this mode,
outgoing calls are dialed from the computer. This mode is identical
to operation with a headset. |
Computer Interface
The industry-standard AT command set is used where
applicable for communication between the computer and the T-311.
The T-311 offers a selectable baud rate from 300
to 9600 bps. This defines the speed with which ASCII data is transferred
between the computer and T-311. It does not refer to the rate of
data transmittal across the telephone lines.
|