| Installation
of the Line Sharing Switch and Polling Controller requires no changes
to your existing polling hardware. The automatic generation of transfer
code feature in the Polling Controller can also eliminate any dialing
string changes. All connections are made through standard telephone
or power connectors in an easy-to-understand configuration. To select
desired access options, you can program the Line Sharing Switch
remotely from a standard touch-tone phone.
System Components
 |
Line Sharing Switch
located at the remote location where lines are being consolidated.
Versions available to support 2, 3, and 4 port applications. |
|
Polling Controller located
at the central polling or host location. |
|
Controller Carrier available
for mounting up to eight Polling Controllers in standard equipment
rack. |
Ordering Information
| Four-port
Line Sharing Switch |
M-394-B-01
M-394-B-02 |
Enables four devices to share one
telephone line. Includes AC transformer with cord and reference
manual.
The -01 is factory set for standalone default routing codes
and can be accessed with or without the Polling Controller.
The -02 is factory set for proprietary default routing codes
and requires a Polling Controller to access.
Order -01 if previously ordered &4 and -02 if &5. |
| Polling
Controller |
| M-390-A-04 |
A device used at the originating polling end
to accurately access ports on Line Sharing Switches.
Includes AC transformer with cord and reference manual.
Order -04 if previously ordered -01, -02 or -03. |
|
